H&R Racing Hawk motor 18,000rpm @ 12V HRHM1

Direct drop in replacement  S-Can 18,000rpm motor as used in most Scalextric, Carrera, and Fly cars. - End bell drive or can drive from long dual end shaft system, with smooth shaft for use with metal pinions

RPM: 18,000
Torque:  140 g/cm   
Power: 6.6 watts

Notes:

- On some "classic" cars which have large diameter wheels, the shaft on the non-drive side may need to be cut off with a dremel or similar tool.
- May be quite tight in Slot.it pods, requiring a gentle shave of the can end of the pod a little with a scalpel, shaving a bit of the inside and the edge and tip of the can end opening, especially the white 1mm offset pods.