Ferrari 412P - #23 Le Mans 1967 CAR06c by Policar

Ferrari 412P #23 Le Mans 1967  Drivers     R.Attwood    P. Courage
Due March/April  2021, pre-order now by email, no deposit required

Chassis: Podded with 0.5mm offset
Motor: Slot.it MX16 23,000rpm  mounted as sidewinder (Motor is screwed to the pod at both mount points with grub screws)
Axle & Gears - 2.38mm (3/32nd)
Gearing: Crown 32t - Pinion 11t brass
Adjustable height front axle - This MODEL has grub screws factory installed for setting front axle height
Hubs: Front 14.3 x 8mm - plastic
Hubs: Rear 15.8mm x 8mm - plastic, PLUS a pair of alloy hubs under the base for serious racing
Tyres: Front PT1088c1
Tyres: Rear PT1228c1
SSD Upgradable:  Yes, use Slot.it chip SP15b
For wood track racing, we recommend replacing the rear tyres with Slot.it PT1171N22 or PT1171G25