Anglewinder Pinion for Flat-6, 7mm 12 Tooth SIPI7012e

Price :
  • Units in Stock : 5


Product code: PI7012e
Description: Pinion 12 teeth 7 mm (1x) – internal motor shaft hole: 2 mm
- This pinion can be used on models from all brands using a motor shaft of
2 mm diameter, in combination with anglewinder gears Ø15 mm

- outside diameter: 7 mm
- inner diameter: 2 mm
- length: 4 mm
- number of teeth: 12

Also a possible fit to use with 18mm sidewinder Spur gears in Scalextric and Fly Chassis, instead of 6.5mm pinions and 19mm spur gears.
In theory these brand setups need a 7.5mm pinion, but at that, they are usually too tight - So I have been using other brand 17.5mm spur with 7.5mm pinions in my own cars. So I think - but haven't had chance to test yet, that 7mm pinion with the18mm spur gears will bridge and mesh okay.