Advanced Pulley BING001

Advanced Pulley with lateral position fixing and M2 set screw.
This is a custom made aftermarket part manufactured by one of the clever engineers in our local club, for use with Professor Motor and Overdrive RSM3/RSM4 lathes.

* Note that this is is NOT a split pulley for use with complete Scalextric axle/wheel units, to use with those, you will need to remove one wheel to thread the axle through the pulley unit; though that can of course be done.
This is primarily for use with smooth shaft axles from hobby brands.
It can take NSR 2.37mm, Slot.it/Policar/ScaleAuto/Sideways/SRC 2.38mm, Spirit and Cartix 2.4mm or Ninco 2.48mm axles etc up to 2.5mm which are used with Bronze bushes to position the axle in the standard jaws of the lathe. This makes it capable of truing wheels for almost every brand of car with various diameter axles.

**You will need to equip yourelf with an appropriate diameter axle and matching bushes for the type of wheel you wish to true.