Tyre Lathe ODRSM3

Beautifully engineered from solid billet aluminium

RSM-3 tyre lathe by Overdrive of Germany. It comes fitted with standard alloy arm with V-cutouts for truing of "fixed wheel" axles such as Scalextric, Ninco Sport/Ninco1, FLY and other makes which have plastic wheels and the gear fixed to the axle, and with nylon or brass axle bushes.


But here's the smart trick. This can also be swapped out in 30 seconds or less, with the optional 2nd arm which contains a ball bearing race into which you can mount a Slot.it axle and then fix alloy wheels on either end to enable truing of all sizes of wheel with grub screws.


This makes the RSM3 lathe a very clever tool for most kinds of car and axle.