H&R Racing Jack Rabbit Motor 14,000rpm @ 12V HRMJR1

Replacement  S-Can 14,000rpm motor.

RPM:  14,000 (official spec), these sometimes test as high as 15,000 rpm
Torque:  150 g/cm   
Power: 5.6 watts

A lower power motor option of similar power to Ninco NC-1 and NC-8 motors, and those found in some other classics racers. Fits most Scalextric, Carrera, and Fly cars. - End bell drive or can drive from long dual end shaft system, with smooth shaft for use with metal pinions

Note, on some "classic" cars which have large diameter wheels, the shaft on the non-drive side may need to be cut off with a dremel or similar tool.